Onshore Petroleum and Natural Gas Production
Changed
Last updated: 3 weeks ago
- Q442. Who should be the owner or operator for the purposes of registering in e-GGRT an onshore petroleum and natural gas production facility subject to subpart W (Oil and Natural Gas Systems) facility?
- Q472. Are oil and gas wells with equipment spread over multiple counties considered one facility?
- Q473. Are the leak detection requirements of ยง98.233(q) applicable to wellheads, separators at the well site, storage tanks and other equipment defined as "production equipment"?
- Q474. Does subpart C or subpart W take precedence in reporting combustion emissions from onshore petroleum and natural gas production facilities and the natural gas distribution facilities?
- Q475. What is the definition of a "basin" in regards to multiple onshore petroleum and natural gas fields?
- Q476. Does the definition of facility for onshore natural gas and petroleum production mean that all equipment associated with one or more production facilities, within the same parish or county, and owned by the same company, are considered one facility?
- Q477. Are the blowdown emissions from a compressor, separator, or other field equipment included in the Onshore petroleum and natural gas production sector?
- Q478. Are the emissions factors provided for equipment leaks for both leaking components and non-leaking components? How do you calculate emissions from leaking components if you are not required to monitor components?
- Q479. How should a reporter determine the annual average daily throughput of oil (or hydrocarbon liquid) for comparison with the 10 barrels per day threshold specified in 40 CFR 98.233(j)? How often does the throughput need to be determined?
- Q480. How should the daily oil throughput for onshore production storage tanks be determined to compare with the threshold of 10 barrels a day in 98.233.j(1)?
- Q481. Which calculation from 40 CFR 98.233(o) should be used for compressor venting at onshore petroleum and natural gas production facilities?
- Q482. Does EPA have the hydrocarbon basin map referenced in 98.238 available on their website?
- Q483. Are emissions from combustion equipment reported under Subpart W or Subpart C?
- Q638. For an onshore natural gas production facility for which I reported stationary combustion emissions under subpart C for RY2010 and for which I will be reporting under subpart W for RY2011, do I need to make any changes to my RY2010 report?
- Q639. For an onshore natural gas production facility that was subject to subpart C for RY2010 and will be subject to subpart W for RY2011, do I report my basin emissions under the same facility registration I used for my RY2010 report?
- Q652. Are the results of Equations W-11A and W-11B in standard conditions or actual conditions?
- Q655. Are geologic provinces 160 and 160A one basin or separate basins for the purposes of defining a facility for onshore petroleum and natural gas production?
- Q735. Why did EPA require that facilities conducting onshore petroleum and natural gas production report by basin?
- Q769. If a facility does not have a GOR value for a well, what options are available to facilities in order to determine GOR for associated gas venting and flaring?
- Q813. What are the optional delayed reporting requirements for wildcat wells and delineation wells?
- Q827. How do I determine the gas to oil ratio (GOR) for my oil well operations to decide whether I need to report emissions from completions and workovers of oil wells with hydraulic fracturing?